Select Language


Electric Chain Hoist (EH2 Series)

Electric Chain Hoist (EH2 Series)

The company is one of the well-known Manufacturers, Exporters and Suppliers of Electric Chain Hoist (EH2 Series) in Kapadwanj. The Electric Chain Hoist (EH2 Series), offered by us, are one of the perfectly designed products with a proven track record of efficient performance. Known for their quality, the Electric Chain Hoist (EH2 Series) are widely in demand across the globe.

Features Of Electric Chain Hoist (EH2 Series)
  • Duty : Class II, 40% Intermittent duty
  • Hooks : As per IS: 15560 - 2005
  • Gears : Alloy Steel Material, precise machined, gear hobbed & case hardened – duly annealed. Spur / Helical combination to provide strength & smooth operation. Gears shall be lubricated with a semi-liquid grease instead of oil, which is less likely to leak, eliminates oil level checks and clings to the gears even after long idle periods.
  • Braking Mechanism : Disc type, Spring Loaded acting at any load position.
  • Motor : Conical Rotor Motor – operating on 415 Volts, 3 Phase, 50 Hz AC Supply with In-built braking mechanism
  • Control Panel Unit : Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station).
  • Operational Control Station : Suspended from Hoist with a Cable & supporting Wire rope – with two push buttons extendable to four / six push button station. Operated with 24 Volts.
  • Overload Relay : Provided for protection to Motor
  • Limit Switches : Provided to control movement of Hook in Hoisting motion at decided levels activated by Lower Hook & End Stop. Prevents Accidents due to Over-hoisting & Over-lowering.
  • Chain Guide : Aluminum – Accurately manufactured with Machine matched recession to provide Load Chain precisely guided movement around the load chain wheel. Designed in two separate halves – ensuring ease in assemble/ dismantle or operation stage.
  • Load Chain : 8 mm, Grade 80, Alloy Steel Material as per IS: 6216
  • Load Chain Wheel : S.G. Iron Casting – Accurately pocketed with proper sitting in the Aluminum Chain Guide.
  • Designed in two separate independent units – Motor Side (Driving Part) & Mechanism Side (Driven Part).
  • Driven by Conical Rotor Motor – Z Start Motor (Make: Anker)
  • Manufactured as per IS: 6547 (Indian Standard)
  • Tested at 25 % Overload


Capacity 0.5 Ton / 1.0 Ton 2.0 Ton
Weight of Hoist at 3 Mtr. Lift 54 Kgs. 62 Kgs.
Extra Weight per Meter 1.5 Kgs. 3.0 Kgs.
No. of Falls of Load Chain 1 Falls 2 Falls
Overall Dimensions: (Head room x Other Dimensions) 640 x 550 x 310 mm 740 x 550 x 310 mm
Headroom (Hook Suspension) 640 mm 740 mm
Headroom (With Monorail Geared Traveling Trolley) 680 mm 790 mm
Headroom (With Monorail Electric Traveling Trolley) 700 mm 805 mm
Motor 1.5 HP, 3 Phase, 1440 RPM, Class F, 40% Intermittent Duty, Induction Motor 1.5 HP, 3 Phase, 1440 RPM, Class F, 40% Intermittent Duty, Induction Motor
Hoisting Speed 4.7 Mtr./ Min 2.35 Mtr./ Min